contact@zlligetiles.com  ·  Handmade in Fez, MoroccoDelivered to your door, US duties included  ·  Sample tiles $2
Skip to content

Does Zellige Contain Lead? Honest Answers From a Fez Workshop

If you have been looking at zellige lately, you have probably seen the videos of people testing tiles for lead. We make zellige by hand in Fez, so we get this question a lot. Here are straight answers, with sources, so you can decide what is right for your home.

Does zellige contain lead?

Traditional glazed zellige usually does, yes. Some websites say “modern zellige is lead-free”. That is true for some factory-made or specially formulated tiles, but it is not true for most traditional handmade zellige, including ours.

The evidence is consistent. A 2022 laboratory study by researchers at Cadi Ayyad University in Marrakech analysed historic zellige from the Saadian Tombs and found that every colour was a lead glaze (El Halim et al.). In 2026, an XRF tester posted videos showing high lead readings on zellige from several well-known US brands, which Business of Home covered in detail.

Why is lead used in zellige glazes?

Zellige is fired in traditional kilns at relatively low temperatures, around 800 to 900°C. Lead lets a glaze melt and become glossy at that heat. It also gives the warm, deep colours zellige is known for, especially greens, honey tones and yellows. Lead-free glazes generally need a hotter kiln, and some traditional colours cannot be reproduced without lead.

Do lighter colours have less lead?

In the published tests we have found, yes, by a wide margin. Tiles of Ezra, an Australian importer, had its zellige glazes tested by an accredited lab. Its light and neutral colours measured under 100 ppm of lead. Mid tones measured 400 to 1,000 ppm, and the darkest colours (deep browns, mustard, bright green) reached up to 30,000 ppm (Tiles of Ezra).

These are another company’s tiles, not ours, and we have not published lab results for our own glazes yet. But the pattern makes sense: the colours that rely most on lead are the warm greens, yellows and browns. If lead is a concern for you, choose whites, off-whites and light neutrals such as Casablanca, Pure White or Skylight.

Is unglazed zellige lead-free?

Unglazed zellige has no glaze, and the glaze is where the lead is. Home testers who checked unglazed zellige report much lower readings than the glazed colours. If you want the zellige texture with the least possible lead, look at our unglazed natural zellige. It needs to be sealed, because the bare clay is porous.

Is a zellige backsplash safe in a kitchen?

For the people living in the home, the risk from tile fixed to a wall is low. Lead in a fired glaze is locked into glass. It does not evaporate, and the tile does not touch your food the way a plate does. The experts quoted by Business of Home saw little risk to people living with zellige on a wall, and clear risk for the people cutting it and making it.

Two practical points: do not use zellige as a surface you prepare or serve food on, and wipe the backsplash with mild soap and water rather than acidic or abrasive cleaners, which can wear the glaze over time.

What about showers and floors?

Showers work the same way as walls: the glaze stays on the tile. On floors, the glaze wears down slowly with foot traffic, so floors are where we would be most careful. For a floor, choose a light colour or unglazed zellige, and read our notes on zellige in showers.

Who is actually at risk?

  • Installers: cutting, grinding and drilling glazed tile makes dust, and that dust can contain lead. This is the main exposure in a renovation.
  • The people who make the tiles: mixing glazes and firing kilns is where exposure is highest. This is a real issue in traditional workshops, and one reason the industry is slowly moving toward lead-free glazes.
  • The people living in the home: low, once the tile is installed and the dust is cleaned up properly.

How to install zellige safely

  • Cut tiles with a wet saw, outside if possible, so dust stays in the water.
  • Wear a well-fitted N95 or P100 mask when cutting or drilling.
  • Clean up with a HEPA vacuum and damp cloths. Do not dry sweep.
  • Keep children and pregnant people out of the room while tiles are being cut.
  • Wash hands before eating, and wash work clothes separately.

Our zellige installation guide covers the rest of the process.

XRF readings vs lab tests: what do the numbers mean?

The handheld XRF guns used in online videos measure how much lead is in the glaze, often shown in ppm or percent. A lab leach test, such as ASTM C738, measures how much lead actually comes off the surface when it is exposed to acid. The two answer different questions. A tile can contain lead and release very little of it, and a quick XRF reading is a screen, not a certified result.

Is there a legal limit for lead in tile in the US?

There is no federal limit for lead in wall or floor tile. The 90 ppm figure often quoted online is the US limit for paint, used as a benchmark. In California, Proposition 65 requires a warning on products that can expose people to lead, rather than banning them.

What we recommend

  • If lead matters to you, choose light colours or unglazed zellige, and avoid deep greens, yellows and browns.
  • Use zellige on walls, backsplashes and showers rather than high-traffic floors or food surfaces.
  • Make sure your installer cuts wet and wears a mask.
  • Ask us any question before you order. We would rather you choose with full information.

You can order samples of the light colours first and see them on your wall.

Leave a Reply

Your email address will not be published. Required fields are marked *