contact@zlligetiles.com  ·  Handmade in Fez, MoroccoDelivered to your door, US duties included  ·  Sample tiles $2
Skip to content

Grout for Zellige Tile: Colour, Joint Width and Sanded vs Unsanded

Short answer: Zellige looks best with very tight joints, about 1/16 inch (1 to 2 mm). Grout lines are irregular by nature because each tile is cut by hand. With joints that tight, use an unsanded grout. Pick a grout colour close to the tile (white with white zellige, a soft grey or a matching tint with colours) for a seamless look. Seal the tiles before grouting so the grout does not stain the edges.

We make zellige in Fez and help customers plan installs every week. This is what we tell tilers and homeowners.

Joint width: how wide should zellige grout lines be?

JointLookWhen to use it
Almost none (tiles touching)The traditional Moroccan look. Joints are thin and irregular because the edges are not straight.Backsplashes, feature walls, fireplaces. Takes a patient tiler.
About 1/16 in (1 to 2 mm)The most popular choice. Still looks handmade, easier to grout fully.Kitchens, bathroom walls, showers. Our default recommendation.
1/8 in (3 mm) or moreA grid appears, and the tile looks more like regular ceramic.Floors, or when a tiler needs room to correct uneven tiles. Most people find it less beautiful on walls.

Do not use plastic spacers to force a perfect grid. Zellige tiles vary in size by a millimetre or two, so the joints will never be perfectly even. That’s part of the look.

Sanded or unsanded grout?

  • Unsanded grout is for joints of 1/8 inch or less, which covers almost all zellige installs. It fills thin, irregular joints and won’t scratch the glaze.
  • Sanded grout is only for wider joints (above 1/8 inch). The sand can scratch the glaze as you wipe, so test it on a spare tile first.
  • Epoxy grout is very water-resistant, but it sets fast and is hard to clean off an uneven surface. Only use it if your tiler has used epoxy on handmade tile before.

Grout colour: which colour goes with zellige?

Tile colourGrout we suggestEffect
White, creamBright white or warm whiteA soft, seamless surface. The glaze does the talking.
Greens, bluesLight grey, or a tint close to the tileThe colour reads as one surface and the grout lines disappear.
Dark (black, deep green, navy)Charcoal or a matching dark groutRich and deep. White grout here looks busy.
Terracotta, warm tonesSand or beigeWarm and natural.
Any colour, contrasting groutWhite on dark tile, or dark on lightShows every irregular edge. Bold, but less calm.

Tip: in a kitchen, a grout slightly darker than white hides cooking stains better than bright white.

How to grout zellige, step by step

  1. Let the thinset cure (usually 24 hours).
  2. Seal the tiles first. Apply a penetrating sealer on the faces and especially the edges, which are often unglazed. This keeps grout from staining them.
  3. Work small areas. Press grout into the joints with a rubber float held at an angle.
  4. Wipe early and gently with a damp sponge. Zellige has dips where grout hides, so wipe more often than with flat tile.
  5. Remove the haze with a dry cloth once the grout firms up.
  6. Seal again after the grout cures (follow the grout maker’s timing), especially in showers and behind sinks.

Common mistakes

  • Grouting before sealing, which leaves tiles with dark stained edges.
  • Using wide joints and sanded grout on a backsplash, so it loses the handmade look.
  • Letting grout dry on the surface. On textured glaze it is hard to remove later.
  • Mixing tiles from only one box, so colour bands show. Mix tiles from several boxes as you set them.

Planning a project? See zellige pros and cons, prices on zellige tile price per square foot, or compare sellers on best zellige tile brands in the US.

Frequently asked questions

What size grout line for zellige?

About 1/16 inch (1 to 2 mm), or tighter. Traditional zellige is set almost edge to edge, and the joints stay slightly irregular because each tile is cut by hand.

Should I use sanded or unsanded grout with zellige?

Unsanded grout, because zellige joints are usually 1/8 inch or less. Sanded grout is only for wider joints, and it can scratch the glaze.

What colour grout is best for white zellige?

White or warm white grout gives the cleanest, most seamless look. In a busy kitchen, a very light grey hides stains better.

Do you seal zellige before grouting?

Yes. Seal the tiles before grouting so the grout does not stain the porous edges, then seal again once the grout has cured.

Can you use epoxy grout with zellige?

You can, but it is hard to clean off an uneven, glazed surface. Most tilers use a good unsanded cement grout and seal it. Only use epoxy if your tiler knows handmade tile.