contact@zlligetiles.com  ·  Handmade in Fez, MoroccoDelivered to your door, US duties included  ·  Sample tiles $2
Skip to content

How Zellige Is Made in Fez, Step by Step

Every zellige tile we ship starts as a lump of grey clay in Fez and ends as a small, slightly uneven piece of glazed tile cut by hand. The process has changed very little in centuries, and knowing how it works explains why handmade zellige looks the way it does, and why no two tiles match.

1. The clay

Zellige is made from the grey clay of the Fez region. The raw clay is broken up and soaked in water until it becomes soft and workable, then kneaded to push out air and stones. Air left inside the clay can make a tile crack in the kiln, so this step matters more than it looks.

2. Shaping and drying

The soft clay is pressed into flat square moulds and smoothed by hand. The tiles are then laid out in the open air and left to dry in the sun. Drying slowly keeps them from warping too much, but they are never perfectly flat. That gentle unevenness is one of the reasons a zellige wall reflects light in so many directions.

3. The first firing

Once dry, the tiles go into a traditional kiln for their first firing. Many workshops in Fez still burn olive pits and wood, which gives an irregular heat. Tiles nearer the fire come out a little different from tiles at the edge, and that small difference carries through to the final colour.

4. Glazing

Each fired tile is dipped by hand into the glaze, one at a time. Some tiles take a thicker coat, some a thinner one, and the glaze runs and pools slightly at the edges. Then the tiles are fired again to melt the glaze into a glossy surface. This second firing is where you get the tone changes, tiny pinholes and crazing that make every batch unique. In our own workshop we make 40 glazes this way, from Casablanca white to deep browns like Burnt Sugar.

5. Cutting by hand

This is the step people remember. A cutter sits with the glazed tile and shapes it with a sharp hammer called a menkach, chipping away the clay until the tile reaches its final size. The edges are then bevelled so the tiles sit close together with tight joints. For geometric mosaics, cutters work from drawn patterns and cut dozens of small shapes that are later assembled face down into panels.

Cutting by hand is why the edges of zellige are never razor straight and why a box contains small chips and variations. It is also why a zellige wall has its rhythm: each tile is a little different from its neighbour.

6. Sorting and packing

After cutting, tiles are sorted and packed by hand. We pack 4×4 and hexagon tiles 100 per box and 2×2 tiles 400 per box, and we mix tiles within each box so the tone variation spreads evenly across the wall.

What this means for your project

  • Expect variation. Shade, thickness and edges vary from tile to tile. That is the look, not a defect.
  • Order a little extra. Plan about 10 to 15% over your measured area for cuts and for picking the tiles you like best.
  • Mix boxes as you install. Pull tiles from several boxes at once so colour changes blend across the wall.
  • See it in person. Photos never show the glaze depth well, so a sample box is the easiest way to choose.

Want to go further? Read what zellige tile is, see how to install zellige tiles, or if you are buying for a showroom or a large project, how importing zellige from Morocco works.

One comment

Leave a Reply

Your email address will not be published. Required fields are marked *